View HSMN-A430-V7YM2_8982624.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet broadcom av02-0208en october 26, 2017 description the broadcom ? power plcc-4 smt leds with lens are high- performance plcc-4 package size smt leds targeted mainly in automotive and electronic signs and signals (ess) markets. these top-mount single-chip pac kages with focused radiation offer high brightness in beam direction and are excellent for interior automotive, indoor and outdoor sign and industrial applications. with additional lens in 30 variants, these products are especially fitting to applications for traffic lig hts, chmsl, and displays. the plcc-4 package family is able to dissipate heat better compared to the plcc-2 packages. in proportion to this increase in driving current, this family of leds is able to produce higher light output compared to the conventional plcc-2 smt leds. as an extension of the standard flat top plcc-4 smt leds, the power plcc-4 with lens device is able to provide focused beams within narrow viewing angles (30) meeting the markets requirements for focused radiation and high brightness in beam directions. the power plcc-4 smt led with 30 is ideal for panel, push button, or general backlighting in automotive interior and exterior, sign, office equipment, industrial equipment, and home appliances applications. this package design, coupled with careful selection of component materials, allows the power plcc-4 smt led with lens to perform with higher reliability in a larger temperature range C40 c to 100 c. thi s high reliability feature is crucial to allow the power plcc-4 smt led with lens to perform well in harsh environments, such as its target automotive and ess markets. the power plcc-4 smt led with lens package is also designed to be compatible with both ir-solder re-flow and through-the-wave soldering. features ? industry-standard plcc-4 ? high reliability led package ? high brightness using allngap and ingan dice technologies ? high optical efficiency ? narrow viewing angle at 30 ? available in 8-mm carrier tape on 7- inch reel ? compatible with both ir and ttw soldering process applications interior automotive: ? instrument panel backlighting ? central console backlighting ? cabin backlighting ? navigation a nd audio system ? dome lighting ? push button backlighting exterior automotive: ? turn signals ? chmsl ? rear combination lamp ? side repeaters electronic signs and signals: ? interior and exterior full color sign ? variable message sign ? garden lighting office automation, home appliances, industrial equipment: ? front panel backlighting ? push button backlighting ? display backlighting caution! this led is esd sensitive. please observe appropriate precautio ns during handling and processing. refer to application note an - 1142 for additional details. hsmx-a43x-xxxxx surface mount led indicator
broadcom av02-0208en 2 hsmx-a43x-xxxxx data sheet surface mount led indicator the broadcom power plcc-4 smt le d with 30 lens carries the par t number hsmx- a43x-xxxxx. the high brightness alingap and ingan dice technologi es used provide the product br ightness that meets the a utomotive and ess market requirements. the lens package will compleme nt and complete the existing alingap and inga n color standard power- plcc-4 led that broadcom offers, providing customers an extra l ens option from one supplier. to facilitate easy pick and place assembly, the l eds are packed in eia-compliant tape and r eel. every reel is shipped in single intensity and color bin ( except for red co lor), to provi de close uniformity. figure 1: package dimensions source a figure 2: package dimensions source b note: 1. all dimensions are in mm. 2. electrical connection between all cathodes is recommended. 2.8 0.2 2.2 0.2 0.7 0.1 3.5 0.2 0.8 0.3 0.5 0.1 0.80 0.1 0.1 typ. 3.87 max. package marking 3.2 0.2 -ve -ve +ve -ve package marking 3.87 max. 0.80 r 0.1 0.1 typ. 3.5 r 0.2 0.8 r 0.3 0.5 r 0.1 2.8 r 0.2 2.2 r 0.2 +ve -ve 3.2 r 0.2 -ve -ve 0.7 r 0.1
broadcom av02-0208en 3 hsmx-a43x-xxxxx data sheet surface mount led indicator device selection guide note: 1. the luminous intensity, i v , is measured at the mechanical a xis of the lamp package. the a ctual peak of the spatial radiation pattern might not be aligned with this axis. 2. i v tolerance is 12%. color part number min. i v (mcd) typ. i v (mcd) max. i v (mcd) test current (ma) dice technology red hsmc-a430-w50m1 1125 2300 3550 50 alingap hsmc-a431-x90m1 2240 4000 7150 50 alingap hsmc-a431-y70m1 3550 7150 50 alingap hsmc-a431-y80m1 3550 9000 50 alingap red orange hsmj-a430-w50m1 1125 2300 3550 50 alingap hsmj-a431-x90m1 2240 4500 7150 50 alingap hsmj-a431-x90m1 2240 7150 50 alingap hsmj-a431-y70m1 3550 7150 50 alingap orange hsml-a431-x90m1 2240 4500 7150 50 alingap amber hsma-a430-w90m1 1400 3000 4500 50 alingap hsma-a431-y00m1 2850 5000 50 alingap hsma-a431-x90m1 2240 4700 7150 50 alingap hsma-a431-13nm1 7150 14000 50 alingap hsma-a431-z50m1 4500 14000 50 alingap hsma-a431-z5wm1 4500 14000 50 alingap green hsmm-a430-x90m2 2240 7150 30 ingan hsmm-a430-y3ym2 2850 5600 30 ingan hsmm-a430-y7ym2 3550 7150 30 ingan blue hsmn-a430-v50m2 715 2240 30 ingan HSMN-A430-V7YM2 900 1800 30 ingan
broadcom av02-0208en 4 hsmx-a43x-xxxxx data sheet surface mount led indicator part numbering system hsmx 1 -ax 2 x 3 x 4 -x 5 x 6 x 7 x 8 x 9 code description option x 1 led chip color c red j red orange l orange aamber mgreen nblue x 2 package type 4 plcc-4 x 3 x 4 device specific configuration x 5 minimum intensity bin limits refer intensity bin limit x 6 intensity bin select 0 full distribution 2 2 half bins starting from x 5 1 3 3 half bins starting from x 5 1 4 4 half bins starting from x 5 1 5 5 half bins starting from x 5 1 6 2 half bins starting from x 5 2 7 3 half bins starting from x 5 2 8 4 half bins starting from x 5 2 9 5 half bins starting from x 5 2 x 7 color bin sele c t 0 full distribution z a and b only y b and c only w c and d only v d and e only u e and f only t f and g only s g and h only q a, b and c only p b, c and d only n c, d and e only m d, e and f only l e, f and g only k f, g and h only 1 a, b, c and d only 2 e, f g and h only x 8 x 9 packaging option m1 50-ma test curr ent, top mount, 13 inch reel s ize m2 30-ma test current, top mount, 13 inch reel size
hsmx-a43x-xxxxx data sheet surface mount led indicator broadcom av02-0208en 5 intensity bin limits tolerance of each bin limit = 12%. color bin limits forward voltage bin table for hsmv-a43x-xxxxx only. tolerance for each b in limit = 0.1v. bin id min. i v (mcd) max. i v (mcd) u1 450.00 560.00 u2 560.00 715.00 v1 715.00 900.00 v2 900.00 1125.00 w1 1125.00 1400.00 w2 1400.00 1800.00 x1 1800.00 2240.00 x2 2240.00 2850.00 y1 2850.00 3550.00 y2 3550.00 4500.00 z1 4500.00 5600.00 z2 5600.00 7150.00 11 7150.00 9000.00 12 9000.00 11250.00 21 11250.00 14000.00 22 14000.00 18000.00 blue min. (nm) max. (nm) a 460.0 465.0 b 465.0 470.0 c 470.0 475.0 d 475.0 480.0 cyan min. (nm) max. (nm) a 490.0 495.0 b 495.0 500.0 c 500.0 505.0 d 505.0 510.0 green min. (nm) max. (nm) a 515.0 520.0 b 520.0 525.0 c 525.0 530.0 d 530.0 535.0 amber min. (nm) max. (nm) a 582.0 584.5 b 584.5 587.0 c 587.0 589.5 d 589.5 592.0 e 592.0 594.5 f 594.5 597.0 orange min. (nm) max. (nm) a 597.0 600.0 b 600.0 603.0 c 603.0 606.0 d 606.0 609.0 e 609.0 612.0 red/ orange min. (nm) max. (nm) a 611.0 616.0 b 616.0 620.0 red min. (nm) max. (nm) full distribution bin min. (v) max. (v) va 1.9 2.2 vb 2.2 2.5 vc 2.5 2.8 vd 2.8 3.1 ve 3.1 3.4
broadcom av02-0208en 6 hsmx-a43x-xxxxx data sheet surface mount led indicator absolute maximum ratings (t a = 25c) optical characteristics (t a = 25c) electrical characteristics (t a = 25c) parameters hsmc/a hsmv hsmk/m/n unit dc forward current a a. derate linearly as shown in figure 7 and figure 8 . 70 70 30 ma peak forward current b b. duty factor = 10%, frequency = 1 khz. 200 200 90 ma power dissipation 180 240 114 mw reverse voltage 554v junction temperature 110 c operating temperat ure C40 to +100 c storage temperatur e C40 to +100 c color part number dice technology peak wavelength, peak (nm) dominant wavelength, d a (nm) a. the dominant wavelength, d , is derived from the cie chromati city diagram and represents t he color of the device. viewing angle, 2 ? b (degrees) b. ? is the off-axis angle where t he luminous intensity is ? the pe ak intensity. luminous efficacy, v c (lm/w) c. radiant intensity, i e in watts/steradian, may be calculated from the equation i e = i v / v , where i v is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. typical typical typical typical red hsmc-a43x alingap 635 626 30 150 red orange hsmj-a43x alingap 621 615 30 240 hsmv-a430 alingap 623 617 30 263 orange hsml-a431 alingap 609 605 30 320 amber hsma-a43x alingap 592 590 30 480 green hsmm-a430 ingan 518 525 30 500 blue hsmn-a43x ingan 468 470 30 75 cyan hsmk-a43x ingan 500 502 30 285 part number forward voltage, v f (volts) at i f = 50 ma reverse voltage, v r at 100 a reverse voltage, v r at 10 a min. typ. max. min. min. hsmc/j/l/a 1.7 2.2 2.5 5 hsmv 1.7 2.8 3.4 5 part number forward voltage v f (volts) at i f = 30 ma reverse voltage v r at 100 a reverse voltage v r at 10 a minimum typical maximum minimum minimum hsmk/m/n 2.7 3.9 4.6 5
broadcom av02-0208en 7 hsmx-a43x-xxxxx data sheet surface mount led indicator figure 3: relative intensity vs. wavelength figure 4: forward curre nt vs. forward voltage 0 0.2 0.4 0.6 0.8 1 380 430 480 530 580 630 680 730 780 wavelength - nm relative intensity alingap red alingap red orange alingap amber ingan blue ingan green alingap orange cyan ingan 0 10 20 30 40 50 60 70 80 012345 forward voltage - v forward current - ma hsmv hsmc/j/l/a hsmk/m/n )ljxuh5hodwlyhwhvlwyv )ruzdugxuuhwod3 )ljx uh5hodwlyhwhvlwyv)ruzdugxuuhwd1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 dc forward current - ma relative luminous intensity (normalized at 50 ma) 0 0.2 0.4 0.6 0.8 1.0 1.2 0 5 10 15 20 25 30 35 dc forward current - ma relative luminous intensity (normalized at 30 ma)
broadcom av02-0208en 8 hsmx-a43x-xxxxx data sheet surface mount led indicator figure 7: maximum forward current vs. ambient temperature. derated based on tjmax = 110 c (alingap) figure 8: maximum forwar d current vs. ambient temperature. derated based on tjmax = 110 c (ingan) 0 80 0 20 60 80 120 maximum forward current C ma ambient temperature C c 40 40 60 30 300c/w 20 70 100 10 350c/w 470c/w 50 0 0 20 60 80 120 maximum forward current C ma ambient temperature C c 40 20 30 15 300c/w 10 35 100 5 350c/w 470c/w 25 )ljxuh5dgldwlr3dwwhu 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 -90 -60 -30 0 30 60 90 angular displacement - degrees normalized intensity
broadcom av02-0208en 9 hsmx-a43x-xxxxx data sheet surface mount led indicator figure 10: recommended soldering pad pattern (ir reflow) figure 11: recommended soldering pad pattern (ttw) 2.60 (0.103) solder resist represents electrical connectivity between pads 4.50 (0.178) y x 0.40 (0.016) x 0.50 (0.020) y 1.10 (0.043) 1.50 (0.059) dimensions in mm (inches). x x 0.5 (0.020) y y 1.0 (0.039) 2.0 (0.079) 2.0 (0.079) 6.0 (0.236) 3.0 (0.118) 2.8 (0.110) 6.1 (0.240) dimensions in mm (inches). represents electrical connectivity between pads solder resist
broadcom av02-0208en 10 hsmx-a43x-xxxxx data sheet surface mount led indicator figure 12: soft tip vacuum pick-up tool for extracting smd led components from carrier tape figure 13: recommended pb-f ree reflow soldering profile vacuum pick-up tool soft tip nozzle inner diameter size: 1.0 to 1.5 mm 1.25mm radius contour temperature time 10 to 20 sec. 255 c +5c -0c 125c +/- 25c 217c 3c/sec max. max. 120 sec. -6c/sec max. 60-150 sec. figure 14: recommended wave soldering profile laminar wave bottom side of pc board hot air knife turbulent wave fluxing preheat 01020 30 50 100 150 200 250 30 40 50 time C seconds temperature C c 60 70 80 90 100 top side of pc board conveyor speed = 1.83 m/min (6 ft/min) preheat setting = 150 c (100 c pcb) solder wave temperature = 245 c air knife air temperature = 390 c air knife distance = 1.91 mm (0.25 in.) air knife angle = 40 solder: sn63; flux: rma note: allow for boards to be sufficiently cooled before exerting mechanical force.
hsmx-a43x-xxxxx data sheet surface mount led indicator broadcom av02-0208en 11 figure 15: tape leader and trailer dimensions figure 16: tape dimensions 200 mm min. for o 180 reel. 200 mm min. for o 330 reel. trailer component leader 480 mm min. for o 180 reel. 960 mm min. for o 330 reel. c a user feed direction 2.00 0.05 1.75 0.10 5.50 0.05 .388 0.02 3.52 0.10 3.70 0.10 3.00 0.10 8 max 12.00 + 0.30 - 0.10 8.00 0.10 4.00 0.10 1.24 32 max 8 max 32 max o 1.50 0.10
hsmx-a43x-xxxxx data sheet surface mount led indicator broadcom av02-0208en 12 figure 17: reeling orientation handling of moisture-sensitive devices this product is qualified as moisture sensitive level 2a per jedec j-std-020. the following precautions for handling this moisture-sensitive pr oduct will help t o ensure the reliability of the product. ref er to broadcom application note an5305, handling of moisture sensitive surface mount devices, for details. ? before use: C an unopened moisture barrier bag (mbb) can be stored at <40c/90% rh for 12 months. if the actual shelf life has exceeded 12 months and the humidity indicator card (hic) indic ates that baking is not required, it is safe to reflow the leds per the original msl rating. C do not open the mbb pr ior to assembly (for example, for iqc). ? control after opening the mbb: C read the hic immediat ely upon opening of mbb. C keep the leds at <30c/60% rh at all times, and complete all high temperature-related processes, i ncluding soldering, curing, or rework within 672 hours. ? control for unfinished reel: store unused leds in a sealed mbb with desiccant or a desiccator at <5% rh. ? control of assembled boards: if the pcb soldered with the leds is to be subjected to other high-temperature processes, store the pcb in a sealed mbb with desiccant o r desiccator at <5% rh to ensure that all leds have not exceeded their floor life of 672 hours. ? baking is required if: C the hic indicator indicates a change in color for 10% and 5%, as stated on the hic. C the leds are exposed to conditions of >30c/60% rh at any time. C the led's floor life exceeded 672 hours. the recommended baking con dition is 60c 5oc for 20 hours. baking can only be done once. cathode side user feed direction printed label
broadcom, the pulse logo, connect ing everything, avago technolo gies, avago, and the a logo are among the trademarks of broadcom and/or it s affiliates in the un ited states, certain other countries and/or the eu. copyright ? 2017 by broadcom. all rights reserved. the term broadcom refers to broadcom limited and/or its subsi diaries. for more information, please visit www.broadcom.com . broadcom reserves the right to ma ke changes without further not ice to any products or data he rein to improve reliability, function, or design. information furnished by broadcom is belie ved to be accurate and reliable. however, broadcom does not assume any liability arising out of the application or use of this information, nor the app lication or use of any product or circuit described herein, neither does it convey any license un der its patent rights nor the rights of others.

▲Up To Search▲

Price & Availability of HSMN-A430-V7YM2

	To Download HSMN-A430-V7YM2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .